Mold remediation
Water damage drying
Fire & smoke cleanup
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateRestoration work we handle
See the difference
Before
After
Before
After
Before
AfterMold Removal in Fort Worth, TX
Mold removal in Fort Worth typically costs between $1,200 and $4,500 depending on how far the growth has spread, and most jobs are finished within two to four days. That price includes containing the affected area, physically removing contaminated drywall or insulation, and treating the surfaces so the colony doesn’t return. If you’ve spotted discoloration or caught that musty smell, call Keegan Restoration Fort Worth at (682) 900-2821 and we’ll put a written price in your hand before any work starts.
We run every mold removal job under Mold Remediation in Fort Worth because removal is one step, not the whole fix. You pull out the contaminated material, you clean what remains, and you correct the moisture problem that fed it. Skip the last part and the mold is back before the paint dries. Shane Pruitt has built Keegan Restoration Fort Worth to handle the full sequence, with documentation formatted to support your insurance claim and a written guarantee behind every repair.
When You Need Mold Removal
In Fort Worth’s climate, mold doesn’t wait for an invitation. Our heavy spring rains, the stretch of 90-plus-degree days from June through September, and the humidity that sits over the Trinity River basin create ideal conditions for growth inside walls, under sinks, and around HVAC returns. Here’s what usually tells you it’s time:
- A persistent musty smell in one room or hallway that doesn’t clear when you open windows. In older Fort Worth neighborhoods like Ryan Place or Mistletoe Heights, this often points to a slow leak behind plaster walls that’s been feeding mold for months.
- Visible discoloration on drywall, baseboards, or ceiling tiles. It can be black, green, gray, or white, and in areas like Wedgwood or Woodhaven it frequently appears around windows where condensation builds during humid summers.
- Water damage that was never professionally dried. After a pipe burst or roof leak, if the affected area wasn’t dried with professional-grade equipment, mold can take hold within 24 to 48 hours, especially in neighborhoods near the Trinity River where ambient humidity runs higher.
- Allergy symptoms that ease when you leave the house but flare when you’re home. Mold spores circulating through your HVAC system can cause this, and it’s common in homes throughout Tarrant County where ductwork runs through unconditioned attics.
- You’re buying or selling a house and a home inspection flagged mold. Lenders in Fort Worth routinely require a licensed remediation before closing, and lenders want documentation, not promises.
- Condensation you can’t explain on windows, pipes, or walls. North Texas humidity makes this worse, and persistent condensation in a closet or behind furniture creates the damp surface mold needs.
Our Mold Removal Process
The answer to “how does Mold Remediation work in Fort Worth?” is straightforward: we contain the area, remove what’s contaminated, clean what’s salvageable, dry it all out, and verify the job with documentation. Here’s the sequence our technicians follow on every job:
- Inspection and written scope. Before anything else, we find the moisture source and map the affected area. Shane Pruitt or one of our lead technicians walks the property, explains what we’re seeing in plain English, and hands you a written price. That price does not move at the door.
- Containment. We seal off the work area with plastic sheeting and establish negative air pressure so spores don’t spread to the rest of your house while we work. This is the step that separates professional removal from a handyman with a spray bottle.
- Physical removal. Contaminated drywall, insulation, carpet pad, or trim comes out. We bag it, seal it, and carry it out through the shortest path, not through your living room. In Fort Worth homes with pier-and-beam foundations, we also check the crawl space, because that’s where moisture hides.
- Cleaning and treatment. Remaining surfaces get HEPA-vacuumed and treated with an antimicrobial. Brand-name equipment from Phoenix and XPOWER runs through the drying phase, and we monitor moisture levels until the readings confirm the area is dry, not just dry to the touch.
- Verification and documentation. We record moisture readings, photos, and the scope of work before, during, and after. That documentation is formatted to support an insurance claim, and you get the written 365-Day Done Right Promise: if the repair fails within one year, we come back and make it right at no charge.
Mold Removal Pricing in Fort Worth
Here’s what you can expect to pay for mold removal in Fort Worth, based on the scope of the job:
- Small, contained area (a bathroom wall, a closet corner, under one sink): $1,200 to $2,200
- Moderate spread (one full room, a section of ceiling, or a crawl space): $2,200 to $3,800
- Extensive contamination (multiple rooms, HVAC involvement, or structural framing): $3,800 to $6,500+
Three things move the price in Tarrant County. First, square footage of affected material: more drywall and insulation means more labor and more disposal. Second, accessibility: mold behind a kitchen island or in a tight attic costs more to reach than an open garage wall. Third, what we find once we open the wall. In Fort Worth homes built before 1980, we sometimes uncover moisture issues that the Mold Inspection & Testing couldn’t see, and that changes the scope. We show you what we found, explain the options, and put any change in writing before we proceed. No surprise line items at the end.
Every estimate is free. Call (682) 900-2821 and we’ll schedule a visit, walk the property, and hand you a written price. A live person answers the phone, day or night.
Why Fort Worth Homeowners Call Keegan
This city has no shortage of contractors. What separates Keegan Restoration Fort Worth is the standard we write down and stand behind. Every job runs to The Garrison Standard: price in writing before any work starts, background-checked technicians in uniform, professional-grade equipment, and a full-year written guarantee on the repair. That guarantee is the 365-Day Done Right Promise, and it means exactly what it says: if the mold comes back or the repair fails within one year, we return and fix it at no charge. No fine print, no depreciation.
Our equipment roster includes Dri-Eaz, Phoenix, XPOWER, and Injectidry units, operated in compliance with IICRC, RIA, and IFA industry standards. We use the trade’s real words on purpose: extraction, psychrometrics, desiccant drying, scope of loss. Then we explain each one in a plain sentence so you know exactly what’s happening in your home and why. You’re not hiring a sales pitch. You’re hiring a crew that works to a written standard and documents every step.
We’ve been part of the Garrison Partners family since 2005, and every location is independently owned and operated. That means the people who show up at your door are accountable to you and to the name on their truck, not to a corporate call center three states away.
FAQs – Mold Removal
How much does mold removal cost in Fort Worth?
Mold removal in Fort Worth usually runs between $1,200 and $4,500, with small contained jobs at the low end and multi-room contamination at the high end. The exact number depends on square footage, accessibility, and what we find behind the walls. Call (682) 900-2821 for a free written estimate.
Can you remove mold the same day?
In most cases, yes. We keep crews available for emergency mold removal across Fort Worth, and for active water intrusion we can typically start containment and removal within hours of your call. A live person answers at (682) 900-2821 24 hours a day, including nights and weekends.
Is it cheaper to remove mold or replace the drywall?
It depends on how deep the growth goes. Surface mold on painted drywall can sometimes be cleaned and treated, but mold that has penetrated the gypsum core or the paper backing usually means cutting out and replacing that section. We’ll show you what we find and price both paths before you choose. In our experience across Fort Worth, attempting to save mold-compromised drywall usually costs more in callbacks than replacing it the first time.
Does homeowners insurance cover mold removal?
If the mold resulted from a covered water event, such as a burst pipe or storm damage, your policy may pay for removal and repair. We document every job with photos, moisture readings, and a written scope of loss formatted to support your insurance claim. Bring us in early and we’ll help you file with confidence.
Written by Shane Pruitt, Owner at Keegan Restoration Fort Worth, serving Fort Worth.